Are you in Australia and looking to buy UV - sensitive color - changing PLA 3D printer filament? This amazing PLA filament transforms from white to a vivid, deep color when hit by UV light. Once the UV exposure stops, it reverts to its original white color. It's made of 100% virgin material, free from cheap plastic fillers. With a print temperature of 190 – 220°C (depending on the printer model) and a heat - bed temperature of 0 – 60°C, it offers great printing flexibility. The 1KG filament has an accurate 1.75mm diameter with a ± 0.05mm tolerance. The spool, sized with a 197mm diameter, 60mm inner hub, and 60mm height, has low shrinkage. It comes vacuum - sealed with desiccant and has ROHS certification from SGS testing. Browse our other color - changing, specialty, and Phaser3D filaments too.
Using this Phaser3D UV - sensitive color - changing PLA filament is a breeze. First, set your printer's temperature between 190 and 220°C, and the heat bed temperature between 0 and 60°C. Then, load the 1.75mm filament into your 3D printer and start printing as usual. When you want to see the color - changing effect, just expose your printed object to UV light. It'll turn from white to a deep, vibrant color. When you're done, keep the object away from UV light, and it'll go back to white. Here are some things to note. Always check your printer's manual to make sure the temperature settings are suitable. Store the filament in a cool, dry place, and don't leave it out in the open for too long. As for maintenance, since it's vacuum - sealed with desiccant, keep it sealed when not in use to maintain its quality. If you notice any issues with the filament diameter, it might affect the printing, so handle it carefully.
