Say goodbye to print failures with the Bambu Lab Super Tack Cooling Print Plate. Its SuperTack coating offers ultra - strong adhesion for PLA and PETG filaments, even at lower heatbed temperatures. This eliminates adhesion issues, reduces warping when printing large objects, and works great on uneven surfaces. The durable SuperTack coating retains its stickiness after extensive use, with less than 20% adhesion loss after 300 prints. This extends the plate's lifespan, cuts printing costs, and lowers carbon emissions. It gives printed objects a smooth, matte bottom surface that blends well with other surfaces. The coating requires only a very low heatbed temperature, saving energy and reducing power bills while being eco - friendly. For example, when printing PLA, it only needs 45°C compared to 65°C for textured PEI. To remove prints, use the printer's scrapper to gently lift and pry them off. If the print is stuck tightly, heat the plate to 50°C. Remember, the surface is soft, so be careful with the scrapper. Avoid using TPU filament as it can damage the plate. Adjust the heatbed temperature according to your needs for the best adhesion. Before auto - leveling, wipe the nozzle on the special area of the plate to remove residual material. The coating in this area may wear over time, but it won't affect print quality or nozzle life. This plate is a consumable part, and the warranty only covers manufacturing defects. To install on X1, P1, or A1 series, align the plate with the platform's fixed points with the name facing you and then secure it to the magnetic platform. It's made of a specially designed coating on a spring steel plate, 0.05mm for the coating and 0.4mm for the steel plate. It can resist surface temperatures up to 120°C and has a usable print size of 256x256mm.
Using the Bambu Lab Super Tack Cooling Print Plate is easy. First, install it on your X1, P1, or A1 series printer. Align the plate with the fixed points of the platform with the name facing you and then lower it onto the magnetic platform to secure it. When printing, the plate works well with PLA and PETG filaments. You can save energy as it only needs a low heatbed temperature. Adjust the heatbed temperature according to your adhesion needs. Before starting auto - leveling, make sure to wipe the nozzle on the special area of the plate to get rid of any residual material. After printing, use the scrapper that comes with your printer to gently lift and pry off the print. If it's stuck too tightly, heat the plate to 50°C on the heatbed. Here are some important things to keep in mind. The surface of the plate is soft, so handle the scrapper carefully to avoid damage. Don't use TPU filament as it can ruin the build plate. The coating in the special wiping area will wear over time, but this is normal and won't affect the print quality or the nozzle. Also, this plate is a consumable part. The warranty only covers manufacturing defects, not scratches, dents, or cracks. As for maintenance, there's not much you need to do. Just keep it clean and store it in a dry place when not in use. That's all you need to know to get the most out of your Bambu Lab Super Tack Cooling Print Plate.
