Bambu Lab Spare Sheet for Bambu Cool Plate FAP001-1

The Bambu Cool Sheet is a great replacement for your Cool Plate. It has an adhesive side, making it super easy to replace and install. Compatible with X1 Series and P1 Series printers. Before applying a new sheet, tear off the original one and clean the surface. You can use alcohol (anhydrous ethanol or isopropanol solution over 90% concentration) or detergent and water. Keep the surface dry. It's advisable to use special solid glue (Glue Stick for Build Plate) before printing to prevent damage when removing the model. Also, note that other slicer settings may need adjustment based on the printed model and filament requirements. Check the recommended settings for different filaments like PLA/PLA - CF/PLA - GF, TPU, and PVA in the table below.

Using the Bambu Cool Sheet is a breeze. First, when it's time to replace the sheet on your Cool Plate, gently tear off the old one. Then, clean the surface. You can choose to use alcohol, like an anhydrous ethanol or isopropanol solution with over 90% concentration, or simply use detergent and water. Make sure the surface is completely dry before you put on the new sheet. Before you start printing, it's a good idea to use the special solid glue (Glue Stick for Build Plate). This will help protect your model and the sheet when you remove the model later. Also, keep in mind that depending on what you're printing and the type of filament you're using, you might need to adjust the slicer settings. The recommended hotbed temperatures and whether you need to use the glue stick are listed in the table. For example, for PLA, PLA - CF, or PLA - GF filaments, set the hotbed temperature between 35 and 45 degrees Celsius and use the glue stick. Do the same for TPU and PVA filaments, with slightly different hotbed temperatures. Just follow these steps and you'll have a smooth 3D printing experience.