Are you in Australia and looking to buy a top - notch Bondtech CHT BiMetal RepRap Coated Nozzle? This nozzle, made of copper and hardened vanadium steel, is perfect for high - flow applications with abrasive materials. It comes with a nickel coating. You can boost the Max Volumetric Flow of your RepRap M6 style heat block by 50%. Manufactured in - house by Bondtech, it fits various blocks and printers like Mosquito® series, Copperhead™, E3D models, Prusa printers, and RepRap M6. Avoid cold changes of Bondtech CHT Nozzles. Heat the heat block to 280C or at least above 250C before removing or tightening the nozzle, and use a maximum of 1.5 Nm torque. For carbon or glass fiber - loaded abrasive filaments, use 0.6, 0.8, and 1.0mm nozzle sizes. For metal, wood, glitter or other particle - loaded abrasive filaments, the 0.4mm nozzle size is available. The Bondtech CHT BiMetal RepRap Coated Nozzle features a copper body, hardened vanadium steel inserts, nickel coating, and comes one per pack. Available sizes are 0.40, 0.60, 0.80, and 1.0mm. It's optimized for 1.75mm filament and compatible with 2.85mm filament, and requires a 6mm wrench. Its advantages include being abrasive - proof for carbon and glass fiber composites, having a higher melt capacity, achieving 25 - 65% flow rate gains, offering a competitive price - performance ratio, being ultra - precisely machined, having a nickel - coated surface, following the RepRap M6 standard, and being usable with 1.75 or 2.85mm hotends. Note that flow rate gains may vary depending on hardware, materials, and print settings.
Using this Bondtech CHT BiMetal RepRap Coated Nozzle is easy. First, make sure it fits your printer or heat block as it's compatible with many popular models. Before using it, heat up the heat block to at least 250C, preferably 280C. When installing or removing the nozzle, use a 6mm wrench and apply a maximum of 1.5 Nm torque. For different types of filaments, choose the right nozzle size. Use 0.6, 0.8, or 1.0mm for carbon or glass fiber - loaded filaments, and 0.4mm for metal, wood, or glitter - loaded filaments. This nozzle is great for high - flow applications with abrasive materials. To keep it in good condition, clean it regularly. You can use appropriate cleaning tools for 3D printer nozzles. Also, store it in a dry place to avoid rusting of the metal parts. Remember, the flow rate gains might change depending on your hardware, the materials you use, and your print settings.
