E3D and Bambu Lab have joined forces in an official collaboration to present the ObXidian High Flow HotEnds. These are some of the most compact, lightweight, and high - performing hotends available today.
### Features
- **High Flow**: Bambu Lab X1 and P1 series printers are speed demons, but with E3D's high - flow technology, they can do even better. Our internal nozzle modification boosts the volumetric flow rate by 60%. Enjoy more reliable extrusion at the same speed or push the slicer's flow rate limit to fully use the printer's motion system.
- **Smooth and Hard**: The E3DLC™ coating on the nozzle and heater parts adds abrasion resistance for fibre - filled filaments and a non - stick layer to prevent plastic build - up.
- **No Compromise**: These hotends fit right into your stock Bambu setup. No need to adjust the mount or part cooling.
- **Compatibility**: Available in two variants with connectors for X1 and P1 series printers.
### Specifications
- Filament diameter: 1.75 mm
- Compatible with Bambu Lab X1, X1C (X1 Carbon), P1S, and P1P
- A drop - in replacement for Bambu X1 and P1 Series hotends
- 60% more flow rate compared to the standard Bambu hotend
- Patent - pending high - flow technology with Bondtech IP
- ObXidian™ hardened tipped nozzle
- E3DLC™ coating for non - stick properties
- Officially approved and licensed Bambu product
**Note**: Not compatible with the X1E printer.
**WARNING**: This product contains chemicals like Mineral Oils, Lead, and Nickel, which can cause cancer, birth defects, or other reproductive harm in California.
### Includes
- 1 x Assembled Bambu Lab High Flow ObXidian HotEnd (0.40 mm or 0.60mm)
- 2 x Bambu Lab Bolts
### Browse more
- Browse all E3D Nozzles
- Browse all Revo
- Browse all Nozzles
Using your E3D ObXidian High - Flow Hotend is a breeze. First, if you're replacing an existing hotend, just take out the old one and drop in this new hotend. There's no need to adjust the mount or part cooling. It fits right in.
When it comes to printing, you can keep the same printing speed as before and enjoy more reliable and consistent extrusion. Or, if you want, you can increase the volumetric flow rate limit in your slicer to fully use the printer's motion system.
Remember, this hotend is only compatible with Bambu Lab X1, X1C, P1S, and P1P printers. It won't work with the X1E printer.
For maintenance, thanks to the E3DLC™ coating on the nozzle and heater parts, you'll have less plastic build - up. But it's still a good idea to clean the nozzle regularly, especially if you're using fibre - filled filaments. And keep in mind that this product contains some chemicals that can be harmful, so handle it with care and follow all safety guidelines.
