E3D V6 Aluminium Heater Block for Sensor Cartridges

Looking to buy the E3D V6 Heater Block for Sensor Cartridges in Australia? Phaser FPV is your go - to place! This heater block pairs seamlessly with our New Standard thermistor sensor for V6. You can easily switch to our high - temperature, high - accuracy PT100 temperature sensors or a Type - K Thermistor cartridge on your E3D - v6 HotEnd instead of using a thermistor. These heater blocks are quite similar to the standard E3D - v6 ones. But unlike the standard ones with a hole sized for a thermistor and a clamping washer, these have a hole for the PT100 sensor and use an M3 grub screw for quick and easy sensor installation and removal. All our E3D products are genuine, sourced directly from E3D in the UK. With a print farm of over 35 printers, we're experts in this field. If you're confused or need advice, just use our live chat. Also, if you need something 3D printed, upload an STL on our sister site Phaser3D for an instant quote and combine it with your PhaserFPV order at checkout. Browse more products like Heater Cartridges, 3D Printer Nozzles, and various filaments on our site.

Using the E3D V6 Aluminium Heater Block for Sensor Cartridges is easy. First, make sure your E3D - v6 HotEnd is powered off. Then, you can choose to use our New Standard thermistor sensor, high - temperature PT100 sensor, or Type - K Thermistor cartridge. Insert the chosen sensor into the hole of the heater block. If you're using the PT100 sensor, use the M3 grub screw to secure it firmly. When you want to change the sensor later, just loosen the screw. For maintenance, keep the heater block clean. After long - term use, check for any signs of wear or damage. If you notice any issues, don't hesitate to contact us. Always handle the heater block with care to avoid any physical damage. Also, when powering on the E3D - v6 HotEnd, make sure all connections are secure to ensure safe and proper operation.