Are you in Australia and eager to purchase a Prusa XL Double Sided Satin Print Sheet sized 36x36cm? The heatbed comes with embedded high Curie temperature magnets that firmly hold removable spring steel sheets. This Satin sheet broadens our print sheet collection. Its powder-coated surface with a lightly textured matte finish strikes the perfect balance between smooth and textured variants. It offers excellent adhesion, especially for PLA and PETG materials. What's more, it's compatible with a wide range of filaments, from common ones to advanced materials like ABS, ASA, FlexFill 98A, and Polycarbonate. Most materials can be printed without a separation layer. Polycarbonate prints better on this satin sheet compared to smooth and textured ones. If you print with PC often, applying a glue stick layer is recommended to protect the sheet. Here are some important tips: Never clean the Satin powder-coated spring steel sheet with acetone as it can cause surface deterioration. Prints from ASA and PC Blend need a brim/skirt/shield. Also, avoid using sharp metal objects like spatulas to remove prints. Key features include suitability for PLA and PETG, a lightly textured surface, no need for a glue stick when printing PETG, and support for a wide range of filaments including advanced PC blend. You can also browse more Prusa products, all filaments, and 3D printing items.
Using this Prusa XL Double Sided Satin Print Sheet is easy. First, place it on the heatbed with embedded magnets which will hold it firmly. You can start printing various materials like PLA and PETG right away without a glue stick. For Polycarbonate, it's better to use a glue stick layer if you print it often. When printing ASA or PC Blend, remember to add a brim/skirt/shield around the print. As for maintenance, never use acetone to clean the sheet. And when removing the print, don't use sharp metal objects. Just be gentle and you'll keep your print sheet in good condition for a long time.
