Are you in Australia and looking to buy a high - performance hotend? Check out the newly updated Slice Engineering Mosquito™ Magnum Hotend! It now comes with a coated heat break. This hotend can print at speeds of over 30 mm^3/sec. A thermal insulator protects the extended melt zone, with a heat transmission rate as low as 3 W/m*K. You can be confident in high - speed printing while maintaining high - resolution, just like the standard Mosquito® Hotend. The melt zone is extended upwards to keep a small form factor. It's compatible with Rep Rap style nozzles. You can create a multi - extrusion setup without buying new nozzles or modifying the carriage. Installation and assembly instructions are on our Documentation page. The kit includes the Mosquito® Magnum Hotend, mounting hardware, a set of hex keys, and some super tasty US - made gourmet lollipops. Note that the fan, heater cartridge, and thermistor are sold separately. We recommend using Boron Nitride paste for good thermal conductivity. The Mosquito® Magnum finishes projects 20% faster than other high - flow hotends. Your 3D printer can handle engineering - grade plastics and produce high - resolution prints with minimal layer lines. It has the same precision as the standard Mosquito® hotend but a much faster flow rate. It's adaptable to almost any printer. You can switch between high - flow and high - precision in the same print and change the nozzle with one hand. It can unlock engineering - grade plastics up to 500 °C. The Mosquito® Magnum is designed from the ground up with carefully selected materials, even using the same insulator as NASA on the space shuttle. It offers superior heat break performance, increased structural rigidity, a larger temperature operating range, a modular design, is ideal for multiple extrusion systems, and is lightweight.
Hey there! Using the Slice Engineering Mosquito™ Magnum Hotend is a breeze. First, when you get the kit, you'll find the hotend, mounting hardware, and a set of hex keys. Don't forget those yummy lollipops too! The fan, heater cartridge, and thermistor need to be bought separately. Install the hotend following the instructions on our Documentation page. We suggest using Boron Nitride paste to make sure there's good heat transfer between the hotend and the heater/thermistor. When printing, you'll love how fast it is, finishing projects 20% quicker than other high - flow hotends. You can switch between high - flow and high - precision printing in the same job. And changing the nozzle is super easy, just use one hand! This hotend can handle engineering - grade plastics up to 500 °C, so you can print all sorts of cool stuff like car parts and medical devices. But here are some things to keep in mind. Since it can reach high temperatures, make sure your printer can handle it. And always be careful when working around hot parts. Also, remember it's currently only for 1.75 mm filament. With the Mosquito™ Magnum, you're in for a great 3D printing experience!
