Are you on the hunt for a top - notch plastic repellent paint in Australia? Look no further than Slice Engineering's Plastic Repellent Paint™! This revolutionary water - based PTFE nanosuspension is a game - changer. It keeps plastic from sticking to your nozzle and hot block, eliminating that pesky build - up that often leads to print failures. With the vial's brush top, it applies quickly and evenly, forming a dry, transparent coating that can withstand printing temperatures up to 290°C. If you're tired of a sticky 3D printer nozzle, this paint is your perfect solution. Just like a PTFE tube helps your filament slide, this paint makes your nozzle slide easily too. Key features include being a water - based PTFE nanosuspension, repelling plastic, quick and uniform application, bonding with clean metal surfaces on first heating, and high - temperature endurance. Also, check out other great products like PLA, ASA, ABS, PETG, Nylon, PC filaments, SLA resin, specialty filaments, and TPU filaments.
Using Slice Engineering Plastic Repellent Paint™ is a breeze. First, make sure your nozzle and hot block are clean. Then, use the brush on the vial top to apply the paint evenly on the outside of your nozzle and hot block. After applying, heat your printer to let the paint bond with the metal surface and form a dry, transparent coating. When using, note that this paint can endure printing temperatures up to 290°C, but don't exceed this limit. For maintenance, keep the vial tightly closed when not in use to prevent the paint from drying out. If you notice the coating wearing off after a while, you can re - apply the paint to keep the plastic - repelling effect.
