Phaser3D BMSRacing JS-1 Canopy Replacement

Are you in Australia and looking to buy a BMSRacing JS - 1 Canopy Replacement? These are official BMS Racing JS - 1 TPU parts printed by Phaser3D. They protect both the components in the roll cage and the roll cage itself. The parts are designed to absorb impact, so pay attention to the filament, fill, and wall thickness. We use a 0.4mm print head, 1.2mm wall thickness, and 10% in - fill density. No supports are needed for printing. Print one of each STL, except for TPU WasherESC_Spacer.stl, for which you'll need 4 plus parts depending on your ESC and build space. The material is TPU, and it's designed for the JS - 1. Permission was obtained for producing and selling these 3D prints. Check out https://www.thingiverse.com/thing:4420007.

Using the Phaser3D BMSRacing JS - 1 Canopy Replacement is easy. Just replace the old part with this new TPU one. When printing, you don't need to use any supports, but make sure to use the right settings like a 0.4mm print head, 1.2mm wall thickness, and 10% in - fill density. Remember, for the TPU WasherESC_Spacer.stl, you'll need 4 plus parts according to your ESC and how much space you need for your build. As for maintenance, keep the parts clean and dry. If they get dirty, you can gently wipe them with a soft cloth. Also, since they're designed to absorb impact, check them regularly for any signs of damage after a crash or heavy use.