Are you in search of high - quality Phaser3D Steeze Light mounts? You can visit our Phaser FPV store in NSW Gosford to see them in person or purchase online right away. We've elevated the game from Shred Lights! After testing over 20 torches and multiple 3D mount designs, we present STEEZE Lights. 'Steeze' combines style with ease. Our design takes the shape of the board, allowing for easy removal and installation of lights. It holds the lights firmly, can endure impacts, and lasts over 2 hours. The chosen torch is made of aircraft - grade aluminum, can survive tough crashes, uses a single 18650 battery, and has a magnetic end - cap with adjustable light power. Other great features include correct angling to avoid blinding traffic and just illuminate the road ahead. You can leave the mount on the onewheel, and the torch clips in and out in seconds. The mount, designed and printed in TPU, is almost unbreakable. If you break or lose it, we'll send a replacement (just pay the freight). To complete the setup, you need 1x Steeze Mount per side (or just one), 1x EMISAR D4V2 SST - 20 Torch per side (or one), 1x 18650 3000mAh 35a or 1x 18650 3500mah battery per side (or one), and 1x 18650 Charger. An optional Head Torch Mount for your helmet is also available. We provide the correct mounting tape, so you don't need to buy your own. The total cost is $99 for one side and $185 for both sides. The product weighs 14g, is made of TPU, and is designed for Onewheel XR & Onewheel Pint. We offer demos, try - before - you - buy, hiring, training, and honest advice. Visit our store 1 hour north of Sydney or 1 hour south of Newcastle. Contact us if you're interested in hiring a onewheel XR or Pint. Browse all Steeze Mounts and Onewheel products.
Using your Phaser3D Steeze Lights is a breeze. First, attach the Steeze Mount to your Onewheel XR or Pint using the provided mounting tape. Then, simply clip in the EMISAR D4V2 SST - 20 Torch into the mount. The torch uses a single 18650 battery, so make sure it's charged before use. You can adjust the light power with the magnetic end - cap. When riding, the lights are angled correctly to light up the road ahead without blinding traffic. You can leave the mount on the onewheel, and quickly clip the torch in and out as needed. Remember, the mount is made of TPU and is very durable, but in case you break or lose it, contact us for a replacement (you'll just need to pay the freight). Always use the correct 18650 battery, either 3000mAh 35a or 3500mah, and charge it with the included 18650 charger. For maintenance, keep the torch and mount clean. If you get it dirty, just wipe it with a soft cloth. If you're using the optional Head Torch Mount for your helmet, make sure it's securely attached before each ride.
