Are you in Australia and looking to purchase a Voron 2.4 R2 Carbon Edition Functional Parts set? This all - in - one functional parts set is your key to getting your 2.4 kit up and running quickly. With it, you can start printing the non - functional parts needed to complete the kit. The non - accent parts are printed in Prusament Polycarbonate Carbon fibre, while the accents are in eSun ABS+ Fire Engine Red. If you have a different colour preference for the accents, just leave a note in the order comments. Check out all our Voron 3D Printed Part Kits here. Wondering about functional and non - functional parts? For 2.4 & Trident models (not applicable for 0.1 which comes with all printed parts), functional parts provide what you need for your first print. However, be aware that functional parts won't give you an enclosed ready - to - print ABS printer and don't include skirting or acrylic panel mounting. You can print the external parts in PLA once your printer is running and switch to other materials later when you have an enclosure. You might want to buy both functional and non - functional parts before starting your build if this setup doesn't seem ideal. The set includes various parts for different components like the toolhead, AB drive units, X - carriage, clips, front idlers, Z - joints, XY - joints, Z - drive, Z - idlers, miscellaneous items, electronics mounting, DIN brackets. There are also selections for hotend parts (E3D V6, Slice Mosquito, Triangle Labs dragon) and MCU brackets (Duet Duex, BTT SKR 1.3 / 1.4, BTT Octopus, Fysetc Spider). Browse more Voron Parts and Accessories and the Voron 2.4 models.
Using this Voron 2.4 R2 Functional Parts Set is a breeze. First, assemble all the functional parts according to the provided guides. This will allow you to start your printer and begin printing the non - functional parts. For the accents, if you choose a custom colour, make sure to note it in the order. When it comes to printing, start with PLA for external parts as it's easier to work with initially. Once your printer is up and running and you have an enclosure, you can experiment with other materials. Be aware that the functional parts don't make your printer an enclosed ABS - ready machine right away. You'll need to add skirting and acrylic panel mounting separately if you want that setup. As for maintenance, regularly check the moving parts for any signs of wear and tear. Keep the parts clean from dust and debris to ensure smooth operation. If you encounter any issues, refer to the user manual or contact our support team.
