Deepcool Matrexx 55 w/ADD RGB 3 Fans [PC]

The Deepcool Matrexx 55 V3 is a middle - tower PC case that offers excellent airflow and wide motherboard compatibility. It features a tempered glass front panel with side intakes, enhancing airflow, and a tempered glass side panel for a sleek look. This case supports E - ATX, ATX, micro - ATX, and mini - ITX motherboards. It comes with 3 pre - installed 120mm ADD - RGB fans. Radiator support is available at the front (up to 360mm), top (up to 280mm), and rear (up to 120mm). It can accommodate graphic cards up to 370mm horizontally or 340mm when vertically mounted. Backed by a 1 - year Deepcool warranty. Key specs include ABS + SPCC + Tempered Glass materials, 446×210×479mm dimensions, and various drive bays and I/O ports.

Using the Deepcool Matrexx 55 V3 is quite straightforward. First, select your motherboard type - it can support E - ATX, ATX, micro - ATX, or mini - ITX. Install your motherboard into the case carefully, making sure it aligns with the mounting holes. Connect your power supply, which should be an ATX PS2 with a maximum length of 170mm. You can then install your drives in the available 3.5'/2.5' or 2.5' drive bays. For cooling, you have 3 pre - installed 120mm ADD - RGB fans at the front, and you can add more at the rear or top if needed. When installing a radiator, note the size limits at the front, top, and rear. When handling the case, be gentle with the tempered glass panels to avoid breakage. For maintenance, regularly clean the fans and filters to keep the airflow optimal. You can use a can of compressed air to blow out dust from hard - to - reach areas. If you encounter any issues, refer to the 1 - year Deepcool warranty for support.