Simplecom CHN420 Black Aluminium 3 Port SuperSpeed USB HUB with Gigabit Ethernet Adapter [PC]

Are you in Australia and looking to buy a Simplecom 3 - Port USB 3.0 Hub with Gigabit Ethernet? The CHN420 is a must - have for your PC or laptop when you're short on USB ports or lack an RJ45 Ethernet port. It transforms a single SuperSpeed USB port into three USB ports and one Gigabit Ethernet port. Just connect it to your laptop or PC's USB port, and enjoy more USB ports and a Gigabit Ethernet connection, enabling computers without an Ethernet port to access cable networks. It allows for efficient data access and transfer. The three SuperSpeed USB ports support data transfer rates up to 5Gbps, and the RJ45 Gigabit Ethernet port can reach up to 1000Mbps transfer speed. The CHN420 features a sturdy and durable premium aluminium body. With 3 USB ports on the top and an innovative built - in RJ45 Gigabit Ethernet adapter at the end, it's simple to use and keeps your desk uncluttered. Key features include a 3 - Port SuperSpeed USB 3.2 Gen1 (USB 3.0) Hub with Gigabit Ethernet adapter, an aluminium unibody for durability and premium quality, 3 SuperSpeed USB ports with speeds up to 5Gbps, a built - in Gigabit Ethernet supporting up to 1000Mbps transfer speed, LED indicators for power and network status, USB - powered operation (no external power needed), easy installation (plug and play, no additional driver required), and suitability for Chromebooks and Ultrabooks without an Ethernet port. It supports Windows 7 and above (32/64 - bit), Mac OS 10.6 and above. Specifications cover USB 3.2 Gen1 (formerly USB 3.0), SuperSpeed USB - A Male interface, USB bus - powered/self - powered, a working current of <300 mA +/- 10 mA, Ethernet standards (IEEE 802.3, etc.), network protocols (IPv4 and IPv6), an operating temperature of 0 – 50 Celsius, an operating humidity of 10 - 85% RH (non - condensing), dimensions of 87 x 24 x 17mm, and support for Windows 7 and above (32/64 - bit), Mac OS 10.6 and above, Chrome OS. The package includes 1x 3 - Port USB 3.0 Hub with Gigabit Ethernet Adapter and 1x User Manual. Important notes: For stable operation, ensure devices connected to this hub don't exceed the maximum current of your computer's USB port (most PC USB ports supply 0.5A - 0.9A power). Don't connect more than one high - power - consuming device. This hub isn't a stand - alone charger and isn't compatible with iPads or devices with irregular charging requirements. Browse all USB Hubs.

Using the Simplecom CHN420 is a breeze. First, find a USB port on your PC or laptop. Plug the hub into that USB port. Once it's connected, you can start using the three USB ports on top to connect your USB devices like a mouse, keyboard, or flash drive. You can also use the built - in Gigabit Ethernet adapter at the end to connect your computer to a cable network if it doesn't have an Ethernet port. When it comes to the power, the hub is USB - powered, so you don't need any extra power supply. For the best performance, make sure the devices you connect to the hub don't draw more power than your computer's USB port can provide. Most PC USB ports can give 0.5A - 0.9A of power. Don't connect multiple high - power - consuming devices like USB HDDs or USB fans at the same time. Also, keep in mind that this hub isn't meant to charge devices like iPads or those with special charging needs. As for maintenance, keep the hub in a dry place with a temperature between 0 and 50 degrees Celsius and humidity between 10% and 85% (non - condensing). If it gets dirty, you can use a soft, dry cloth to clean it. That's all you need to know to get the most out of your Simplecom CHN420.