Simplecom SA225 USB3.0 to mSATA + M.2 NGFF B Key [PC]

The SA225 is a fantastic 2-in-1 combo adapter that connects both M.2 and mSATA SSDs to a USB 3.0 interface. With this adapter, you can effortlessly access M.2 or mSATA SSDs through a standard USB port on your PC. You can also attach it to a SATA port after removing the USB cable. It's a perfect choice for data backup and migration. Key features include a mSATA + M.2 SSD 2-in-1 design, converting mSATA or M.2 SSDs to USB 3.0, an on-board mSATA and M.2 switch, a detachable USB 3.0 cable, a USB 3.0 (USB3.1 Gen 1) interface with up to 5Gbps data transfer rate, plug-and-play functionality without the need for drivers, and compatibility with Windows 7 and above, as well as Mac OS 10.6 and above. Specifications cover a circuit board size of 97x65x5mm, support for various M.2 (NGFF) SSD form factors like 2230 - D2 - B - M (30mm x 22mm), 2242 - D2 - B - M (42mm x 22mm), 2260 - D2 - B - M (60mm x 22mm), 2280 - D2 - B - M (80mm x 22mm), and full - size mSATA (50.95mm x 30mm). The package includes 1 mSATA + M.2 SSD 2 - in - 1 combo adapter, 1 USB 3.0 cable, 1 screwdriver, and screws with washers.

Using the SA225 adapter is a breeze. First, connect the adapter to your M.2 or mSATA SSD. Then, you can either plug it into a standard USB port on your PC for easy access to the data on the SSD. If you want to use it with a SATA port, simply detach the USB cable. It's a plug - and - play device, so you don't need to install any drivers. Just connect it and start using it right away. When handling the adapter, be gentle with the cables and connections to avoid any damage. Keep it in a dry and clean place to prevent dust from getting inside. If you're not using it for a long time, store it properly. Make sure your PC's operating system is Windows 7 or above, or Mac OS 10.6 or above for compatibility. And that's all you need to know to get the most out of your SA225 adapter.