Simplecom SD352 USB 3.0 to Dual SATA Aluminium Docking Station with 3-Port Hub and 1 Port 2.1A USB Charger w/ Offline Clone SIMSD352 [PC]

Note: Hard drives in the picture are not included. This Simplecom SD322 is a top - notch 2 - bay USB 3.0 docking station with an offline clone function. It directly accepts two 2.5' or 3.5' SATA hard drives, offering a simple, fast, and cost - effective way for data recovery, drive imaging, and testing. Leverage the super - fast USB 3.0 to transfer files at up to 5 Gbps. Connect any 2.5'/3.5' Serial ATA or SATA II hard drive to your computer via a USB 3.0 port on your desktop or laptop. With its offline cloning tech, it can copy files between disks without a computer. It's plug - and - play and hot - swappable, no extra drivers needed. Key features include: direct insertion for 2.5 or 3.5 - inch SATA HDD/SSD, USB 3.0 SuperSpeed interface, backward compatibility with USB 2.0, a sleek aluminium casing with a glossy ABS top panel, LED status indicators, easy installation, support for offline clone, a reliable DC power supply for 2x 10TB hard drives, and compatibility with Windows XP and above, Mac OS 10.10 and above, and Linux. Important: Check that the capacity of HDD 2 is higher than HDD 1. For cloning, just plug in both drives, press the 'Clone' button for about 3 seconds until the LED lights up, then press it again to start. The LED shows cloning progress. Package includes 1x SD322 docking station, 1x USB 3.0 cable, 1x 12V/4A power adapter, and 1x user manual.

Using the Simplecom SD322 docking station is a breeze. First, connect the docking station to your computer using the provided USB 3.0 cable and plug in the power adapter. Then, you can directly insert your 2.5 - inch or 3.5 - inch SATA hard drives. For normal use, once the drives are inserted, your computer should recognize them right away as it's plug - and - play. You can start transferring files at high speed via the USB 3.0 interface. When you want to use the offline cloning feature, make sure the target disk (HDD 2) has a higher capacity than the source disk (HDD 1). Plug both hard drives into the docking station. Press the 'Clone' button for about 3 seconds until the LED lights up, then press it again quickly. The cloning process will start, and you can watch the progress through the LED indicator. After use, it's a good idea to keep the docking station in a dry and clean place. Avoid exposing it to extreme temperatures or moisture. If you need to move it, handle it gently to prevent any internal damage. If you encounter any problems, refer to the user manual that comes in the package.