Ubiquiti NanoHD Unifi Compact 802.11ac Wave2 MU-MIMO Enterprise Access Point (POE-Included) NHU-UAP-NANOHD [PC]

This compact 802.11ac Wave2 MU-MIMO enterprise access point offers high performance. It has 4x4 MU-MIMO on 5GHz (max PHY rate 1733Mbps) and 2x2 MIMO on 2.4GHz (max PHY rate 300Mbps). It uses 802.3af power, has the same mount as UAP-AC-Lite. Dimensions are 160 x 160 x 32.65 mm, weighs 300 g (315 g with mounting kits). It features a RJ45 GbE networking interface, a reset button. Operating on 2.4 GHz and 5 GHz, it has max TX power of 23 dBm on 2.4 GHz and 26 dBm on 5 GHz. Antenna gain is 2.8 dBi on 2.4 GHz and 3 dBi on 5 GHz. Throughput is 300 Mbps on 2.4GHz and 1733 Mbps on 5GHz. Supports 802.11 a/b/g/n/ac/ac-wave2 Wi-Fi standards, with WEP, WPA-PSK, WPA-Enterprise security. Has 8 BSSID per radio, can be mounted on wall/ceiling. Operates at -10 to 70° C and 5 to 95% non - condensing humidity, and is CE, FCC, IC certified.

Using this Ubiquiti NanoHD Unifi access point is easy. First, find a suitable location on the wall or ceiling and use the included mounting kits to install it. Connect it to a UniFi Switch (PoE) for power via the RJ45 GbE networking interface. Then, you can configure the network settings according to your needs, choosing from various Wi - Fi standards and security options. When using, make sure the operating temperature is between -10 to 70° C and the humidity is 5 to 95% non - condensing. Avoid exposing it to extreme conditions. For maintenance, keep it clean and free from dust. If you need to reset it, just press the reset button. Remember, it's CE, FCC, IC certified, so you can trust its quality.