Ugreen DP male to VGA male cable 1.5M 10247 ACBUGN10247 [PC]

This Ugreen cable connects DisplayPort to VGA (male to male). It supports resolutions up to 1920x1200 or 1080p HDTV. The VGA port outputs RGB analog video with a 700mV voltage swing. It has automatic sink detection and standby mode, reduces EMI with spread spectrum, and features EDID pre - fetch. Sink detection is based on DDC return. Measured power is 1.4W when active and 100mW in standby. It gets power from the DP's +3.3V supply.

Using this Ugreen cable is easy. First, find the DisplayPort on your device, like a PC, and plug in the male DisplayPort end of the cable. Then, connect the male VGA end to your monitor or other display device. When you turn on your device, the cable will automatically detect the sink and start working. In standby mode, it consumes very little power. Make sure the power source from the DP is stable to keep the cable functioning properly. Avoid bending the cable too sharply as it may damage the internal wires. If it gets dirty, you can gently wipe it with a dry, soft cloth. That's all you need to know to use and take care of this cable.