BetaFPV BT3.0 Connectors

Are you in Australia and looking to buy top - notch connectors for your 2S whoop drones? Look no further than the BetaFPV BT3.0 Connectors! These connectors are a game - changer for 2S battery use. They're specifically designed for 2S whoop drones, offering a unique and innovative solution. With 3 metal pins, they enable balancing power during charging without the need for an extra balancer connector. This simplifies 2S battery assembly and gives you a lightweight option, weighing only 1.28 grams, much lighter and smaller than regular connectors on the market. For 2S quad pilots, it's a convenient choice that also helps reduce the quad's weight. The BT3.0 connectors combine balance charging and discharge power cord functionalities in one, so you don't have to buy an expensive balance charger. They have a rated discharge current of 12A and an instantaneous current of up to 20A, meeting the 2S battery discharge requirements. The male connector weighs 0.6g/PCS (11.2*9.2*6.1mm), the female connector weighs 0.68g/PCS (10.1*9.1*5.4mm), and together they're 1.28g/PCS. Other items like the BT3.0 XH2.54 Adapter Cable and BT3.0 2S Whoop Cable Pigtail also have their own unique features. The BT3.0 connectors are white, with gold - plated copper metal and PA9T plastic. They have a plug lifespan of 1000 times. They're a 3PIN terminal with specific pin diameters for discharge and charging. There are polarity marks on the welding cup, and reverse connections aren't supported. The BT3.0 2S Whoop Cable Pigtail, made for 2S whoop drones, has a 90 - degree angle between the male connector and the power cord, making it easy to plug and unplug. The BT3.0 connector can be used as a 2S balance charging port with a conventional 2S balance charger via a male - to - male adapter cable. The BT3.0 series accessories, including connectors, batteries, and chargers, are designed for 2S whoop drones and work together seamlessly. Available options include packs of male/female connectors and 2S whoop cable pigtails, each packed in a 70*100 static bag.

Using the BetaFPV BT3.0 Connectors is a breeze. First, when you're soldering the wires, pay close attention to the polarity marks on the welding cup. The blue wire on the BT3.0 2S Whoop Cable Pigtail is the positive pole, and the white wire is the negative pole. Make sure not to force the connector in the reverse direction, as this can cause a short - circuit. For charging, you can use the BT3.0 connector as a 2S balance charging port. Just connect it to a conventional 2S balance charger with the BT3.0 male - to - male adapter cable. When plugging and unplugging the BT3.0 2S Whoop Cable Pigtail, the 90 - degree angle design makes it easy. The insertion and extraction force range is 3 - 22N, so you don't need to use excessive force. For maintenance, keep the connectors clean. Avoid exposing them to extreme temperatures or moisture. If you notice any signs of wear, such as loose pins or damaged plastic, it might be time to replace the connector. Remember, these connectors have a plug lifespan of 1000 times, so use them wisely to get the most out of your purchase.