BrotherHobby Avenger 2507 1500KV/1750KV Motor

Are you in Australia and searching for a top - notch motor for your long - range FPV drone? Look no further! The BrotherHobby Avenger 2507 Motor in 1500KV or 1750KV is the perfect choice. Ideal for 6', 7' and 8' quads, this motor offers excellent performance. It features an Al 7075 base casing and bell cap, a 0.15mm Nippon Steel silicon steel stator, and a 12N14P configuration. The prop adapter shaft thread is M5, and it has a titanium alloy hollow shaft. With 4 - 6S Lipo compatibility, M3 (16mmX16mm) bolt pattern, NMB 9x4x4 bearings, and N52H arc magnets, it's a high - quality option. It weighs 40g with 20cm SR wires and has 18AWG 20cm length wires. Browse all BrotherHobby Motors and Drone Motors now!

Using the BrotherHobby Avenger 2507 Motor is quite simple. First, make sure your drone is powered off. Then, attach the motor to your 6', 7' or 8' quad using the M3 (16mmX16mm) bolt pattern. Connect the 18AWG 20cm length wires to the appropriate power source, ensuring you use a 4 - 6S Lipo battery. When flying, keep an eye on the motor's temperature. If it gets too hot, land your drone and let it cool down. For maintenance, regularly check the bearings for smooth rotation. If you notice any unusual noises or vibrations, it might be time to replace the bearings. Also, clean the motor to remove any dust or debris that could affect its performance. And always store the motor in a dry and cool place when not in use.