GAONENG GNB LiHV 4S 15.2V 1100mAh 120C XT60 LiPo Battery [DG]

Are you in Australia searching for a high - quality battery? Look no further than the GAONENG GNB LiHV 4S 15.2V 1100mAh 120C XT60 LiPo Battery. This graphene LiPo battery is a perfect fit for various devices. It works great with 180 - 330mm Brushless FPV, 5 to 6 inch drones like GEPRC MARK5, MARK4, Crocodile5 Baby, and more. It's also suitable for DJI FPV, Nazgul5, TITAN XL5, and many other models. Whether it's an airplane, quad, quadcopter, helicopter, or DIY FPV, this battery can power them all. Here are the key specifications: Model No. is GNB11004S120AHV, capacity is 1100mAh, voltage is 15.2V (LiHV), cells configuration is 4S1P. The pack size is 25*35*76mm (H*W*L), and it weighs about 122g (+/-4g). It has a discharge rate of 120C and a charge rate from 1C to 5C, with an XT60 discharge connector. You can also browse more GAONENG batteries, 4S batteries, or all batteries.

Using this GAONENG battery is easy. First, make sure the device you're using is turned off. Connect the XT60 connector of the battery to the corresponding port on your device. Then you can turn on your device and enjoy its power. When charging, set your charger to the correct voltage (15.2V LiHV) and charge rate (between 1C and 5C). Always charge the battery in a safe and well - ventilated area. Keep the battery away from heat sources and flammable materials. To maintain the battery's performance, don't over - discharge it. After each use, check the battery for any signs of damage like swelling or leaks. If you notice any issues, stop using the battery immediately. Store the battery in a cool, dry place when not in use.