GEPRC CineBot30 3 HD FPV Drone w/ Walksnail Avatar - 6S

Are you searching for a top - notch FPV drone in Australia? The GEPRC Cinebot30 is a next - generation cinematic FPV drone crafted by the GEPRC team. Its high - strength 7075 aircraft - grade aluminum alloy bracket for the FPV camera marries classic engineering with aesthetics. The newly refined gimbal damping module effortlessly fixes high - frequency vibration and jello issues. This drone can be paired with cameras like GEPRC Naked GoPro Hero 8, GoPro Black Bones, and Insta 360 GO2 for a stable and clear view. **Features**: - Aviation 7075 aluminum alloy camera mounting bracket and fuselage aluminum column. - 1804 motors with strong torque for ultra - low altitude shooting. - Impact - resistant PC injection - molded material. - A design that combines engineering and aesthetics. - Professionally tuned by GEPRC. - GEP - F722 - 45A AIO V2 flight controller. - Quick - disassembly feature. - Walksnail Avatar for great performance. - Low jello effect. **High - strength Components**: The drone uses a high - strength one - piece injection - molded propeller guard and high - toughness PC material. A ring - shaped Cob light strip in the propeller guard has a well - tuned light effect. High - strength grain - cut carbon fiber sheets enhance the fuselage strength. **High - speed Motors**: The Cinebot30 comes with a powerful 1804 motor with an optimized magnetic circuit and strong torque, easily handling ultra - low altitude shooting. With HQ prop T76mm*3 propellers, it has the lowest noise in its class. **Simple Operation**: The GEP - F722 - 45A AIO V2 flight controller offers high - performance redundancy for unexpected situations. The frame design uses only 6 screws to separate the top plate and protection frame, making accessory replacement easy. **Specifications**: - Weight: 221g (excluding battery, TBS Nano RX version). - Recommended Battery: LiPo 6S 850mAh - 1100mAh (6S Version). - Antenna: Peano 5.8G 110mm LHCP UFL Antenna. - Motor: SPEEDX2 1804 - 2450KV (6S Version). - Model: Cinebot30 HD Avatar Quadcopter. - Receiver: PNP, TBS Nano RX, ELRS 2.4G. - Camera: Walksnail Avatar Micro. - Charger connector: XT60H - M. - Propeller: HQ prop T76mm. - FC: GEP - F722 - 45A AIO V2. - MCU: STM32F722RET6. - Bottom plate: 1.5mm. - VTX: Walksnail Avatar. - Isolation Plate: 2mm. - Wheelbase: 127mm. - IMU: ICM - 42688 - P. - Frame: GEP - CT30. - Main plate: 3mm. - Brand: GEPRC. **Includes**: - 1x GEPRC CineBot30 3' HD FPV Drone w/ Walksnail Avatar - 6S (Choose Receiver). - 1x GoPro camera mount holder. - 1x Battery strap M15*200mm. - 1x Battery strap M15*220mm. - 2x HQProp T76MM (pair). - 2x Battery Silicone Pads. - 1x Set of screwdrivers. - 1x Antenna fixed tube. - 1x Set of screws.

Using the GEPRC CineBot30 3 HD FPV Drone is quite easy. First, make sure you've chosen the right receiver and installed it properly. Attach the propellers carefully, and then connect the battery using the XT60H - M charger connector. Turn on the drone and your controller, and you're ready to fly. When flying, be aware of your surroundings. The drone's powerful 1804 motors can handle ultra - low altitude shooting, but still keep a safe distance from obstacles. Also, since it has a Walksnail Avatar camera, you'll get a great view, but make sure to set it up correctly for the best results. For maintenance, after each flight, check the propellers for any signs of damage. If they're worn out, replace them with the spare HQProp T76MM propellers included. Clean the drone regularly, especially the camera lens, to keep the image clear. Also, check the screws on the frame to ensure they're tight. If you need to replace any accessories, the simple 6 - screw design makes it a breeze. Store the drone in a cool, dry place when not in use, and keep the battery charged properly according to the manufacturer's instructions.