GEPRC CineLog 35 P 3.5 Cinewhoop Drone HD w/ RunCam Wasp - Performance Edition

Are you in Australia looking to buy a high - performance cinewhoop drone? The GEPRC CineLog 35 P 3.5 Performance Edition is your perfect choice. This drone is an optimized and upgraded version based on the standard one, designed for lighter weight and longer endurance. Its main goal is to maximize racing performance within the existing frame size. **Key Features**: - Comes with two 3D - printed parts that support various cameras like GoPro, Naked 8/10, Insta 360 GO2, and Caddx Peanut. - The RunCam Link Wasp digital image transmission system offers stable, clear FPV images with true colors and details. - Reversed - motor design provides higher flight efficiency, longer endurance, and flexible flight attitudes. - Equipped with a GEPRC F722 - 45A AIO high - performance FC and an integrated BLHeli_S 45A 6S ESC. - The 3.5 - inch integrated propeller guard has a hollowed - out design for weight and noise reduction. - Thanks to the GEPRC Team’s tuning, the flight feel is delicate and flexible. - The shock - absorbing gimbal ensures stable and clear shooting. - Powered by SPEEDX2 2105.5 motors with DT90 - 3 propellers. **Performance Edition Upgrades**: We've upgraded the power system. The F722 - 45A AIO paired with the new SPEEDX2 2105.5 motor offers stronger power and faster response. This makes it easier to fly with a GoPro camera and perform difficult action flights. You can even do freestyle flying with a GEPRC Naked Hero 8 Camera. It perfectly meets the needs of aerial photography creators for high - level shooting. **Specifications**: - Antenna: GEPRC Momoda 5.8g UFL LHCP 175mm Long Version Antenna - Model: CineLog35 Performance HD RunCam Link Wasp - OSD: BetaFlight OSD w/AT7456E chip - Receiver: PNP /ELRS / TBS Nano RX - Motor: SPEEDX2 2105.5 - 2650KV 6S - Frame: GEP - CL35 Performance - Camera: RunCam Wasp - FC: GEP - F722 - 45A AIO - Bottom plate: 2.0mm - Propeller: HQ DT90 - 3 - Wheelbase: 142mm - ESC: BLheli_S 45A - Arm plate: 3.5mm - MCU: STM32F722 - Top plate: 2.5mm - Weight: 258.1g - Brand: GEPRC - IMU: 6 - Axis - VTX: Link **What's Included**: - 1x GEPRC CineLog 35 P 3.5 Cinewhoop Drone HD w/ RunCam Link Wasp - Performance Edition - 2x LiPo Strap (M15x200mm) - 4x 15 - degree damping rings - 1x 3D Print Antenna Mount - 2x HQ DT90 - 3 Propellers - 2x Battery Silicone Pads - 1x Fixed Antenna tube - 2x Landing Pads - 1x Hardware Kit - 1x Screwdriver

Using the GEPRC CineLog 35 P 3.5 Cinewhoop Drone HD with RunCam Link Wasp - Performance Edition is quite straightforward. First, assemble the drone using the included hardware kit and screwdriver. Make sure all the parts are securely attached. Attach the propellers carefully, following the correct direction. When it comes to flying, charge the battery fully before your first flight. Turn on the drone and your receiver. You can use different types of receivers like PNP, ELRS, or TBS Nano RX. Once it's in the air, enjoy the stable and clear FPV images provided by the RunCam Link Wasp system. If you want to use different cameras, simply use the 3D - printed parts to install them. **Note**: - Don't fly the drone in bad weather conditions like heavy rain or strong winds. - Keep it away from people, animals, and buildings to avoid accidents. - Always check the propellers for any damage before each flight. **Maintenance**: - After each flight, clean the drone to remove any dirt or debris. You can use a soft brush. - Check the battery regularly. If it shows signs of swelling or damage, replace it immediately. - Periodically inspect all the connections and wires to ensure they are in good condition.