Happymodel ES24TX Slim Pro ExpressLRS TX Module

Are you in Australia and looking to buy a top - notch RF module for your RC Airplane or FPV Racing drone? The Happymodel ES24TX Slim Pro ExpressLRS TX Module is the answer. It's based on the popular open - source ExpressLRS, offering low latency and high packet rates. With a main hardware architecture of ESP32, ESP8285, and SX1280 RF chip, this module comes pre - loaded with Expresslrs firmware and is plug - and - play for Frsky X - lite/X - lite pro/X9 Lite and TBS Tango2. It has an aluminum alloy shell and a cooling fan that kicks in automatically at 250mw. Supporting a max power output of about 1000mw, it's ideal for Long Range FPV. Key features include up to 1000mw RF power (external power supply needed for T - lite and Tango2 radios), RGB LED, cooling fan, open - source ExpressLRS, long range, low latency, high re - flashed rates, telemetry data transmission, and a CNC aluminum protective shell. Specifications cover regulatory domain, MCU, RF chip, socket type, frequency range, refresh rates, RF output power, power supply voltage, weight, dimensions, and antenna gain. The firmware target is HappyModel_ES24TX_Pro_Series_2400_TX. It includes 1x ES24TX Slim Pro TX module and 1x Happymodel Moxon 2.4GHz antenna.

Using the Happymodel ES24TX Slim Pro ExpressLRS TX Module is a breeze. First, make sure your device (like Frsky X - lite/X - lite pro/X9 Lite or TBS Tango2) is powered off. Then, simply plug the module into the appropriate socket. If you're using a T - lite or Tango2 radio and want to use the 1000mw power output, you'll need to connect an external power supply. Once plugged in, power on your device and the module will be ready to go. As for the cooling fan, it will start working automatically when the module reaches 250mw. When it comes to maintenance, keep the module in a dry and clean place. Avoid exposing it to extreme temperatures. If the aluminum shell gets dirty, you can use a soft cloth to gently wipe it. Also, be careful when handling the antenna to prevent damage. If you need to update the firmware, follow the instructions for the target HappyModel_ES24TX_Pro_Series_2400_TX.