iFlight 3A LC Filter Module

Are you in Australia and seeking to buy 3Amp LC Filter Modules? In quadcopters, motors and ESCs can generate noise that harms FPV video quality. This compact and efficient LC filter uses large - value inductor and capacitor components. It's designed to clean noisy DC power supplies, which often cause lines in wireless video images. The most common sign of noise is disturbing lines across the screen during flight. Noise problems frequently occur in sensitive FPV video systems when long power leads (7cm+), limited wiring space, improperly filtered transmitters, noise from speed controllers or switch - mode DC - DC voltage converters, or a shared battery (to reduce weight) are used. This interference can lead to video lines, banding, random drop - outs, and reduced transmission range. For example, if your robot or R/C model's 12V motor battery powers the video camera and A/V transmitter, this LC filter can cut down video 'noise' when the motor runs. Features: It's perfect for sensitive FPV - and RC - components in a single - battery setup. Both negative and positive leads are filtered (common mode). It suits setups up to 36V and a maximum 2A load. Functions: It reduces DC - DC switcher supply ripple, cleans noisy power from a shared battery, cuts down interference radiated through the air and noise via power wires, attenuates most high - frequency power supply noise and interference, and suppresses noise in the power for your FPV setup (like VTX and FPV camera). Specifications: Max. 36V input, 2A maximal current, built - in reverse polarity protection, very low voltage drop, only 0.5g weight. 3A LC Filter Specs: Max. 30V input, 3A maximal current, built - in reverse polarity protection, very low voltage drop, 16*6*3mm dimension, only 0.6g weight. Package includes 1 iFlight LC Filter Module - 3A and 1 set of connecting cables. Browse more iFlight, Capacitors, and FPV products.

Using the iFlight 3A LC Filter Module is easy. First, make sure your power supply voltage is within the specified range (up to 36V for general use and up to 30V for the 3A filter). Then, connect the filter to your power source and the device you want to protect, like your FPV camera or VTX, using the provided connecting cables. When connecting, pay attention to the polarity to avoid any damage as it has built - in reverse polarity protection, but it's still best to connect correctly. While using, if you notice any abnormal heat or the device stops working properly, immediately disconnect the power. For maintenance, keep the filter in a dry and clean place. It's a lightweight and compact device, so handle it gently to avoid physical damage. And that's all you need to know to get the most out of your iFlight 3A LC Filter Module.