Multi GP Race Spec Material For Race Gates Phaser FPV Branded - 20 SETS - PREORDER

Pre - order 20 gates! The lead time after pre - order is 8 - 12 weeks.

You're purchasing one top panel and two side panels for Multi GP Gates. It's a three - piece system. Unlike some other designs, if one panel breaks, you can easily replace it.

We only sell the fabric because other components are heavy. For high durability, buy metal gates from Metal Land or Bunnings, which most FPV racing clubs use. Or, for lower cost, use PVC pipes.

Specs

• Internal size: 2000x2000
• Woven mesh fabric
• 75mm pockets with reinforced eyelets

Parts Required (option 1: plastic)

• 25mm conduit
• 2x 25mm elbow connectors
• 2x 12mm rebars
• Cable ties to hold top and side panels together.

Parts Required (option 2: metal)

• Refer to our spreadsheet for your own calculations.

How to use: First, choose either the plastic or metal parts as per your preference. For the plastic option, connect the 25mm conduit with 2x 25mm elbow connectors and insert 2x 12mm rebars. Then use cable ties to attach the top and side panels. If you pick the metal option, refer to the spreadsheet for calculations and assemble accordingly. Note: The product is a pre - order item, and it will take 8 - 12 weeks to arrive. Also, since we only sell the fabric, you need to source the supporting parts separately. Maintenance: Keep the woven mesh fabric dry and clean. If a panel breaks, you can easily replace it as it's a three - piece system.