Runcam SpeedyBee Adapter 3

Are you in Australia looking to buy the SpeedyBee Adapter 3 BetaFlight Adapters? Transform your smartphone into a mobile FPV buddy. Connect to the SpeedyBee mobile app and configure your flight controller anywhere, anytime. Flash the latest Betaflight/Emuflight/INAV in just 2 minutes before flying. Not only for flight controllers, change your BLHeli_S ESCs settings or update firmware on the go. With the new SpeedyBee app, configure motor direction wirelessly, supporting BLHeli_32 and BLHeli_S ESCs. Use your LiPo batteries as 30W power banks. Connect the adapter to a LiPo battery and charge your phone and tablets. It supports QC3.0/AFC/Apple 2.4A (iPhone 6s and above) and other fast - charging protocols up to 30W, with over - current, short - circuit, and over - temperature protection. Check out the charging performance on different phones in the table. Note, charging needs a 2S LiPo or above. Forgot your LiPo checker? No problem. Connect 1S - 6S LiPo, and it shows battery voltage and remaining power with color codes (GREEN>80%, WHITE 40 - 80%, RED<40%). A beeper alerts you when power is below 40% to extend battery life. The adapter comes with a dual - head data cable, MicroUSB 2.0 and USB 3.0 Type C, solving connector compatibility issues. Enjoy the best of both worlds with WiFi + Bluetooth. Use Bluetooth for quick configurator access or switch to Wi - Fi for faster firmware flashing and Blackbox data downloading. Browse more SpeedyBee products and the SpeedyBee Adapter 2.

Using the SpeedyBee Adapter 3 is easy. To use it as a flight controller configurator, connect it to your flight controller using the dual - head data cable that comes with it. Then connect your smartphone to the SpeedyBee mobile app. You can configure settings and flash firmware quickly. When using it as a power bank, connect it to a 2S LiPo battery or higher. Then plug your phone or tablet into the adapter. Remember, it supports various fast - charging protocols up to 30W. To check your LiPo battery, just connect it to the adapter, and it will show the voltage and remaining power. If the remaining power is less than 40%, the built - in beeper will alert you. For maintenance, keep it dry and clean. Avoid dropping it or exposing it to extreme temperatures. When not in use, store it in a safe place.