STRIX XT60 RGB LED Tap

Are you going to an event that needs LEDs or just want to add some extra sparkle without disassembling your rig? The STRIX XT60 RGB LED Taps are perfect for you! Just plug it between your stack and flight pack, and you'll have 6 RGB LEDs shining. Each LED strip can be independently bridged to create various color combinations from side to side. Connect multiple bridges on the same side for even more vibrant colors! Special thanks to Jamie Ferrell for the idea of this battery tap. If you have a cool product idea, open a ticket and we'll try our best to make it happen. Specifications: Weight - 8.5g, Dimensions - 32x16x14.5mm, Intended Voltage - 4S. Note: To make the LEDs work, you need to solder bridge at least one RGB section. Otherwise, the LEDs won't light up.

Using the STRIX XT60 RGB LED Tap is super easy. First, find the space between your stack and flight pack. Then, simply plug the tap in there. Once it's connected, you can start creating cool lighting effects. Each LED strip can be bridged independently. To do this, you can connect different bridges on the same side to get more colors. Remember, if you want the LEDs to light up, you have to make a solder bridge over at least one RGB section. If you don't, the LEDs won't turn on. As for maintenance, keep it in a dry and clean place. Avoid getting it wet or dropping it on hard surfaces. If you have any issues, don't hesitate to open a ticket and we'll help you out.