Sub250 Oasisfly25 2.5 Inches HD O3 Freestyle Quadcopter

The Oasisfly25 is a high - performance quadcopter with a SUB250 - Oasis Frame. It has a 135mm wheelbase, 2mm roof thickness, and 2.5mm bottom and upper bottom plates, as well as 2.5mm arm thickness. The VTX is an O3 Air Unit and the camera is an O3 camera. It comes with 5.8G & 2.4G antennas, SUB250 1404/4500kv motors, and HQ2.5x2.5x3 propellers. The quadcopter weighs 171g ±5g. You can choose from PNP, TBS NanoRX, or ELRS2.4 receivers. A Lipo 4S 530 - 730mah battery (not included) with an XT30 connector is recommended. The package includes 1 Oasisfly25 drone, 1 pair of HQ2.5x2.5x3 propellers, 2 M15*150mm battery cable ties, 1 spare screw bag, and 2 L - shaped screwdrivers (1.5mm and 2mm). Also, you can browse more HD BNF, Micro Quads, and Quads.

Using the Oasisfly25 quadcopter is easy. First, make sure you have a compatible battery. Connect the battery using the XT30 connector. Then, turn on the drone and your receiver. You're ready to take off and enjoy flying. When flying, keep it in an open area away from people, buildings, and other obstacles. Don't fly in bad weather conditions like rain or strong winds. For maintenance, after each flight, check the propellers for any damage. If they're worn out, replace them with the spare ones in the package. Clean the drone regularly to keep it in good condition. Also, store the drone in a dry and cool place when not in use. If you have any problems with the receiver, try to re - pair it with the drone following the instruction manual.