TBS Tango 2 Upgrade PCB v3

Are you in Australia and eager to buy the TBS Tango 2 Upgrade PCB? This is the latest Tango 2 board revision to upgrade your existing Tango 2. It offers lite module bay support and features Micro TX V2 internals. Check your Tango 2 version: if you bought it before FPV33623, you have PCB V1; before FPV41300, it's PCB V2; and FPV41301 or higher means PCB V3. Unsure about your version? Open it up and look for a ribbon - cable connection. V1 is the original PCB with MicroTX V1 hardware, max 250mw. V2 has a module bay add - on connector, same Crossfire TX hardware, max 250mw. V3 uses new MicroTX V2 internals due to component EOL, with more features to come. Browse more Tango 2, TBS Radios, TBS Crossfire Receivers, and all TBS products.

Using your TBS Tango 2 Upgrade PCB v3 is straightforward. First, make sure you've correctly identified your Tango 2's current version as described in the product details. If you're upgrading from an older version, carefully follow the standard procedures for PCB replacement. When handling the PCB, avoid touching the sensitive components with your bare hands to prevent static damage. For maintenance, keep the PCB in a dry and clean environment. Periodically check for any loose connections or signs of wear. If you have any issues, don't hesitate to refer back to the product details or contact customer support.