T-Motor Velox V50A SE 6S BLHeli_32 4-in-1 ESC

Get ready to experience top - notch power and speed with T - Motor's latest 4 - in - 1 ESC. Despite its compact 30x30 size, it offers a robust 50A current. The brand - new T - motor heatsink, which is 10% larger than previous models, keeps your ESC cool during operation. Here are the key specs: Model V50A with 50A current and 55A peak current. It can handle a DC input voltage of 10 - 27V (3 - 6S Lipo). Weighing only 18.5g and sized at 45.4x43.8x8mm, it has 30.5x30.5 M3 mounting holes. You can tune its parameters using the BLHeliSuite32 software and it runs on the T - Motor T4 02 firmware. The package includes an electrolytic capacitor, an XT60 power cable, two types of silicone wire harnesses, and five silicone shock - absorbing washers. Browse related 4 - in - 1 ESCs, all ESCs, and T - motor products.

Using your T - Motor Velox 6S 50A 4 - in - 1 ESC is a breeze. First, make sure to connect the XT60 power cable properly to your power source. Check that the input voltage is within the 10 - 27V (3 - 6S Lipo) range. You can use the BLHeliSuite32 software to tune the parameters according to your needs. When mounting, use the M3 holes on the 30.5x30.5 pattern. Be careful not to apply too much force while tightening the screws. During operation, keep an eye on the heatsink. If it gets too hot, you may need to give your ESC a break. For maintenance, periodically check the silicone wire harnesses for any signs of wear or damage. Replace the shock - absorbing washers if they become too soft or deformed. And always store your ESC in a dry and cool place when not in use.