Walksnail Avatar Repeater WN02-FP005

Enhance your FPV experience with the Walksnail Avatar Repeater. It uses 5.2G and 5.8G high - power transmission with high - gain directional antennas to supercharge the signal. The built - in hardware filter reduces adjacent channel interference for a more stable transmission. Setting it up is a breeze. Just power on the ground unit, repeater, and air unit, press the pairing buttons on the ground and air units. Once paired successfully, the indicator turns green, binding is done, and you'll see the image on the VRX. With adjustable power, it can adapt to different environments like film and media production, outdoor travel photography, and adventure trips. It seamlessly integrates with Walksnail products, including Goggles X, Avatar VRX, and all Walksnail VTXs. Unleash the full potential of FPV with this HD digital video transmission repeater for smoother, clearer video. Specifications: System - Avatar HD system; Power input - 9V - 26V; Dimensions - 119.5*72*18.6mm; Weight - 145.9g (Antenna not included); I/O Interface - Type - C, 4Pin 1.0mm Port; Transmission Resolution - 1080p/100fps, 1080p/60fps, 720p/100fps, 720p/60fps; Communication Frequency - 5.15GHz - 5.30GHz; 5.50GHz - 5.85GHz; Transmitter Power (EIRP) - FCC <30dBm, CE <14dBm, SRRC <20dBm, MIC <25dBm; 5.2G Antenna - Frequency range 5.15GHz - 5.30GHz, Gain 7dBi (AVG), Polarisation LHCP; 5.8G Antenna - Frequency range 5.50GHz - 6.00GHz, Gain 7dBi (AVG), Polarisation LHCP.

Using the Walksnail Avatar Repeater is easy. First, make sure you power on the ground unit, the repeater, and the air unit. Then, press the pairing buttons on both the ground unit and the air unit. Wait until the indicator light turns green, which means the pairing is successful and the binding is complete. You'll then see the image on the VRX. When using it, keep in mind that the power input should be between 9V and 26V. Different regions have different power limits, so check your local regulations for the transmitter power. For maintenance, keep it in a dry place and avoid any physical damage. Clean it gently with a soft cloth if it gets dirty. Enjoy using the repeater for your FPV adventures, whether it's for film production, outdoor photography, or just having fun.