Zap Z Ends-Tips PT18

Z-ENDS are designed to fit over the standard bottle ends of all ZAP glues. You can cut back the tips to deposit larger amounts of glue. If glue builds up on the outside of a Z-END, just let it harden and it'll pop off, leaving a clean, open tip. When using the 38cm Micro-Dropper tubing, let the glue wick down to the tube end and then gently squeeze the bottle for a small glue drop. This set includes 10 standard ZAP tips and 38cm of Micro Dropper Tubing. Also, you can browse ZAP Flexi Tips, all Glue and Adhesives, and all ZAP products.

Using these ZAP Z Ends-Tips PT18 is easy. First, fit the Z-ENDS over the standard bottle ends of your ZAP glue. If you need to deposit more glue, simply cut back the tips. When using the Micro-Dropper tubing, let the glue slowly wick down to the end of the tube. Then, gently squeeze the bottle to get a small drop of glue. Sometimes, glue might build up on the outside of a Z-END. Don't worry, just let it harden and it'll come off easily. Keep the tips clean for better performance. And that's all there is to it! Enjoy using your ZAP glue with these handy tips.