Zeez Design - Zeez 55amp 4-in-1 30x30 BLHeli_32 ESC V3 2022

Are you in Australia and on the hunt for a top - notch Zeez Design 55A 4 - in - 1 ESC? Look no further! This ZEEZ 55A 4 - in - 1 ESC is a game - changer, an upgraded version of last year’s 3030 ESC. We've listened to global users and incorporated the latest tech advancements. With the fastest MCU, the STM32G0 fully supported by BLHELI32, it offers bi - directional DSHOT and all digital protocols right out of the box. It also supports a 96KHz PWM drive frequency to the MOSFET and all analog protocols. New pilots' advice led us to improve the solder pads with more clearance, making soldering a breeze. We've also added extra copper around the pads for extra strength. Key features include a 3S - 6S LiPo power input, 55Amps x 4 continuous current, 75Amps x 4 burst current, and more. The package comes with the ESC, aluminum standoffs, an 8 - pin connector, capacitors, and an XT60 for battery connection.

Using your Zeez Design 55A 4 - in - 1 ESC is easy. First, connect the battery using the XT60 with 12AWG silicon cable provided in the package. Then, connect the ESC to the flight controller using the 8 - pin to servo connector JST SH 1.00mm connector. When soldering, take advantage of the improved solder pads for a hassle - free experience. Note that this ESC works with a 3S - 6S LiPo power input, so make sure your battery is within this range. Don't exceed the continuous current of 55Amps x 4 or the burst current of 75Amps x 4 to avoid damaging the ESC. For maintenance, keep the ESC clean and dry. Check the solder joints regularly for any signs of wear or damage. If you notice any issues, consult a professional or refer to the BLHeliSuite32 firmware for troubleshooting.