eSun ePA-12 Nylon 3D Print Filament 1kg 1.75mm

Are you in Australia searching for high - quality 3D printing filament? Look no further! eSun's ePA - 12 Nylon Filament is here. It's the latest innovation in nylon filaments from eSun, perfect for 3D printing projects that demand top - notch mechanical properties. Key features include high toughness and impact resistance, up to 165% elongation at break with excellent fatigue resistance. It's self - lubricating, wear - resistant, can withstand high temperatures up to 100℃, has low shrinkage, and strong layer bonding. For print settings, the optimal printing temperature is 260 - 290℃, bed temperature should be 70 - 90℃, printing speed can range from 40 to 100mm/s, and you don't need to use the cooling fan. Also, explore more specialty, nylon, and eSun filaments.

Using this eSun ePA - 12 Nylon 3D Printing Filament is easy. First, set your printer according to the recommended settings: keep the printing temperature between 260 - 290℃ and the bed temperature at 70 - 90℃. Print at a speed of 40 - 100mm/s and turn off the cooling fan. When handling the filament, be gentle as it's tough but still can be damaged if roughly treated. Store it in a dry place to prevent moisture absorption, which could affect the print quality. After each use, make sure to properly wind the remaining filament to avoid tangles. If you encounter any issues during printing, double - check the print settings and ensure the filament is feeding smoothly.