Are you in Australia and seeking to buy Two - Tone / Dual Silk Rainbow Silk Filament? Phaser3D Dual Colour is comparable to 'matterHackers Quantum PLA'. It's the top - pick filament for creating the most eye - catching, visually stunning 3D prints. The filament has two colors that will both show up on your final print. Just rotate the part, and you can change the visible color. Silk PLAs create shiny, somewhat translucent prints that look and feel like they're covered in silk. No need to paint these prints; their natural look is amazing. 'Silk' filaments are usually enhanced PLAs, getting their gloss from additives. They mostly share the pros and cons of PLA filament. Here, we'll focus on PLA - based silk filaments. Remember, print temperatures and speeds are just guidelines, and settings vary for each machine. We suggest printing a temperature tower and doing stringing tests to find your best settings. Tips for great prints with Dual PLA Filament: Smaller melt zones are better. Volcano - style hotends can cause mixing that dulls the visual effect of Quantum. E3D v6, Mosquito, and most stock printer hotends are ideal. Before a big print, print an alignment coin to know where the color - change line is for your printer and filament setup. The angle varies for each setup, but if the printer and filament stay in the same orientation, the alignment is consistent across spools. Quantum prints look best when the outside perimeters of the part are printed in the same direction, but many slicers don't do this by default. Specifications: Spool Net Weight: 1kg, Diameter: 1.75mm ± 0.17mm, Print Temperature: 190 - 220°C, Hot Bed Temperature: 0 - 50°C, Print Speed: 20 - 50mm/s. The high diameter variance is because the co - extrusion of two separate colors makes the filament a bit oval. This can cause issues with some extruders like the e3d Hemera and the orbiter 1.5 - 2.0, and printers with Capricorn tubing may also face problems. Browse more: All Rainbow Filaments, All PLA Filament, All Filament.
Using this Phaser3D Dual 2 - Colour Silk PLA Filament is a great way to create amazing 3D prints. First, keep in mind that the print temperature should be between 190 - 220°C and the hot bed temperature between 0 - 50°C, and the print speed from 20 - 50mm/s. But these are just guidelines, so it's a good idea to print a temperature tower and do stringing tests to find the best settings for your specific machine. When it comes to the hotend, smaller melt zones work better. Avoid using Volcano - style hotends as they can cause mixing that reduces the cool visual effect. E3D v6, Mosquito, and most stock printer hotends are your friends here. Before you start a big print, print an alignment coin. This will tell you exactly where the color - change line is on your printer and filament setup. The angle might be different for each printer, but as long as the printer and filament stay in the same position, the alignment will be the same across spools. To make your prints look their best, make sure the outside perimeters of the part are printed in the same direction. Note that the filament has a bit of a high diameter variance because it's made by joining two colors together, which makes it a bit oval. This can cause problems with some extruders like the e3d Hemera and the orbiter 1.5 - 2.0, and printers using Capricorn tubing. Just store the filament in a dry place to keep it in good condition, and you'll be able to keep making those awesome 3D prints.
