Enhance your 3D prints with the Bambu 3D Effect Plate! This amazing plate can transfer four captivating surface textures to your printed items, from Carbon Fibre to Starry, Galaxy, and Diamond. The Galaxy Surface creates a vibrant galaxy rainbow effect on the first layer, shining and changing color with the angle. It's perfect with silk or shiny filaments. The Carbon Fibre texture gives a subtle look like real carbon fibre, adding a unique 3D effect, especially with grey carbon filaments. The Starry Surface transfers a rainbow kaleidoscope starry effect, also working best with silk or shiny filaments. The Diamond Surface imprints a diamond pattern on the first layer. To install the 3D Effect Spare Sheet, you can download the STL file of the 'Fixture tool' from the provided link. For best results, use it on Bambu Lab's official steel plate or the Bambu Engineering Plate. Set the plate type to Smooth PEI/High Temp Plate and follow the Heatbed Recommended Settings. Keep the surface clean as grease can make the patterns disappear. When using Effect Sheets, skip LIDAR calibration or calibrate with a regular plate. These sheets are consumables, so place your prints on different areas to extend their lifespan. Don't apply glue to the sheet and be careful when using a scraper. We recommend using PLA and TPU filaments for printing and adjusting other slicer settings according to your model and filament needs. Select Smooth PEI Plate/High Temp Plate in Bambu Studio.
Using the Bambu 3D Effect Plate is easy and fun. First, download the STL file of the 'Fixture tool' for installing the 3D Effect Spare Sheet. It's best to use it on Bambu Lab's official steel plate or the Bambu Engineering Plate. Make sure to remove any previous sheets and clean the surface thoroughly before installing the new one. Set the plate type to Smooth PEI/High Temp Plate in Bambu Studio and follow the Heatbed Recommended Settings. When printing, use PLA or TPU filaments for the best results and adjust other slicer settings as needed. Keep in mind that due to reflections, LIDAR calibration might not work well with the Effect Sheets, so you can skip it or calibrate with a regular plate. These sheets are consumables, so to make them last longer, place your print objects on different areas of the sheet. Avoid applying glue to the sheet surface and be very careful when using a scraper to remove prints to prevent damage. Also, keep the surface clean using hot water and detergent and avoid touching it to make sure the 3D effect patterns stay visible.
