Are you in Australia searching for a Bondtech DDX Extruder for your Creality Ender CR10s? The DDX v3 is a game - changer! It comes with an integrated fan shroud and mount, making installation a breeze. You can snap the fan to the shroud without using screws and adjust the shroud's height with just one front - access screw.
When it comes to using a bed probe with the DDX, there's no need to worry. It's designed to have space for the bed probe on the x - carriage. For models like those without space for a BLtouch on the X - carriage, you can print a mount and attach it to the right - hand side of the DDX.
This high - performance, high - reliability 1.75mm Dual Drive extruder from Bondtech is based on the popular BMG. Its unique Dual - Drive technology, combined with either the factory hotend or industry - leading hotends like Copperhead™ or Mosquito™ from Slice Engineering, ensures trouble - free material feeding and allows you to use a wider range of materials. The housing parts are made of PA12 (polyamide) using industrial - grade SLS technology for maximum strength and precision.
The Bondtech DDX Direct Drive Extruder for Creality gives you more options. You can work with different materials, achieve higher flow or use wider nozzles, and print thinner layers for better quality. It features effective Hot - End cooling and a 3:1 gearing ratio, enabling high - resolution prints with small nozzles or high - flow prints with bigger nozzles.
Setting it up is easy. The kit attaches to the carriage with just 2 screws.
The product includes a DDX v3 Extruder, a Nema17 Pancake stepper motor, a Thumbscrew Assembly, a 70cm Stepper motor extension cable, a 60cm PTFE tube, a 7cm Capricorn tube, 4 zip - ties, 3 M3x12mm screws, 2 M3x20mm screws, an M3 square nut, an M3x10mm button head screw, a 10079 - 3 PA12 Fan Shroud, and an SLS Ender Hotend Adapter.
It's compatible with CR - 10S Pro, CR - 10S Pro v2, and CR - 10 Max. Note that when using the DDX v3 on the CR - 10 Max, the z - height will be limited to between 430mm and 455mm instead of the original 470mm. You need to adjust the Z(height) parameter in the slicer's Machine Settings.
Using the Bondtech DDX v3 Extruder is quite straightforward. First, attach the kit to the carriage with just 2 screws. The integrated fan shroud makes the installation even easier. You can snap the fan to the shroud without using screws and adjust the height of the shroud with one front - access screw.
When it comes to using a bed probe, if your printer model has space on the x - carriage, you can directly attach the bed probe. For models without such space, like those not suitable for a BLtouch on the X - carriage, print a mount and attach it to the right - hand side of the DDX.
Make sure to choose the right hotend. You can use the factory hotend, or for better performance, go for industry - leading hotends like Copperhead™ or Mosquito™ from Slice Engineering.
For the CR - 10 Max, remember that the z - height is limited to between 430mm and 455mm. Adjust the Z(height) parameter in the slicer's Machine Settings to reflect this. Select the lower value and fine - tune the max Z through testing.
As for maintenance, keep the extruder clean. Regularly check the screws to make sure they are tight. If there are any issues with material feeding, check the gears and the tubes. Also, make sure the fan is working properly to keep the Hot - End cooled effectively.
