Are you in Australia and eager to buy an E3D Revo High Flow Hotside? With just a 30 - second nozzle change, you can achieve high - flow 3D printing! Thanks to the optimized internal nozzle geometry, it offers high - flow results in the same form factor as a standard E3D Revo™. The Revo High Flow HotSide bundle maximizes the volumetric flow performance of your Revo HotEnd.
**Kit Options**:
- **Single Nozzle Kit**: Comes with a 60W 24V HeaterCore with Spring & Sock, a 0.6mm Revo High Flow Nozzle & Sock, and a Revo Spring.
- **Fully Loaded**: Includes a 60W 24V HeaterCore with Spring & Sock, 0.60mm, 0.80mm, 1.00mm, and 1.20mm Revo High Flow Nozzles & Socks.
**Key Benefits**:
- **Higher Flow**: Revo™ High Flow increases the volumetric flow rate, allowing you to print faster.
- **Same Form Factor**: Unlike previous high - flow hotends, it maintains the exact same form factor as standard Revo HotEnds, so no need to adjust your existing mounts and fan ducts.
- **Unique Geometry**: It uses a custom internal geometry to improve thermal transfer to the filament.
- **60W HeaterCore**: While not always necessary, it provides extra power for high - temperature, high - flow printing with materials like Polycarbonate. For PLA and PETG, a 40W HeaterCore is sufficient, but for maximum flow, choose the 60W one.
- **More Nozzle Sizes**: It unlocks higher flow for existing nozzle sizes and adds new ones like 1.00mm, 1.20mm, and 1.40mm. Combined with the standard Revo nozzle range, it supports a wide range of printing applications from 0.15mm to 1.40mm.
- **Rapid Identification**: The color - coded silicone sock and engraved 'HF' and size numbers on each nozzle make it easy to identify nozzle sizes at a glance.
Our volumetric flow rate figures are based on a semi - standardized testing procedure. Check our Documentation for full details. When compared to other high - flow hotends on the market under the same test, Revo High Flow outperforms in terms of maximum flow rate. Using high - flow designed materials like HTPLA or PLA³ can further boost its performance.
Browse all Revo, E3D, and Silicone Socks products.
Using the E3D Revo High Flow Hotside is a breeze. First, decide which kit you want - the single nozzle kit or the fully loaded one. If you're using the 60W HeaterCore, make sure your power supply can handle it. For normal materials like PLA and PETG, the 40W HeaterCore is enough, but if you're printing high - temperature materials, go for the 60W one.
When changing nozzles, it only takes 30 seconds. Just follow the color - coded silicone sock to quickly identify the right nozzle size. The engraved numbers on the nozzles also help you tell them apart.
As for maintenance, keep the nozzles clean. You can use a soft brush to remove any debris. Check the HeaterCore regularly to make sure it's working properly. If you notice any issues like uneven heating or a drop in performance, refer to our documentation or contact our support team.
Remember, when testing the volumetric flow rate, follow our semi - standardized procedure for accurate results. And if you want to achieve the best performance, consider using high - flow designed materials like HTPLA or PLA³.
