Are you in Australia and looking to buy 230mmx230mm Spring PEI Coated Build Sheets for your Artillery Genius? This double - sided bed is a game - changer. One side is a smooth PEI layer, and the other is a textured gold side with the PHASER FPV Logo in red at the bottom, while the smooth side has a transparent logo. Made by Energetic, it takes your 3D printing to new heights. With a PEI coated build sheet, say goodbye to glue sticks and painters tape. Just clean the bed with isopropyl alcohol, start printing, and when done, flex the sheet and the print pops off easily. Advantages? It never warps or rusts. New users can easily get a good first layer. It's flexible, removable, and sticks well to magnets. It suits various filaments, especially PLA. Cleaning is a breeze - just flex the plate after cooling. It has fast heater performance, reducing waiting time. It's a lifetime 3D printer bed. Features include a 0.2MM thick SmoothPEI with 3M468 tape. The spring steel sheet is flat. It has a strong magnetic base (1.5MM, 300LSE tape, magnetism - 600GS, high - temp resistant up to 130C for a long time). The material is 100% real Ultem1000 (PEI) in amber color with a matte surface, made in Europe. The PEI has pre - applied 3m tape, bubble - free. Recommended print temps are: PLA – 60C, HTPLA – 60C, PETG – 70 - 80C, PCTG – 70 - 80C, ABS – 100C.
Using this 3D printer build sheet is super easy. First, clean the bed with isopropyl alcohol before starting a print. For different filaments, set the print temperature as recommended (like 60C for PLA). When printing PETG, PCTG, or TPU, apply hairspray or PVA gluestick to prevent damage to the PEI surface. After printing, wait until the plate is close to room temperature (under 30C) before removing the print. To remove the print, simply take out the spring steel plate, flex it a bit, and the print will pop off. Maintenance is simple too. Keep it clean with isopropyl alcohol, and it'll last you a long time as it won't warp or rust.
