Product Information
Are you in Australia and looking to buy a Prusa MK3S PEI/textured coated spring steel build plate? This Energetic bed is a great choice! It's double-sided, with no magnet. The textured side in the PEI PRO HF Version is black, and it features the PHASER FPV logo in red at the bottom. Note that these beds are made by a third party, not Prusa.
A PEI coated build sheet takes your 3D printing to the next level. No more worrying about glue sticks, painters tape, or prints not sticking. Just clean the bed with isopropyl alcohol, start printing, and when done, flex the sheet and the print pops off.
Advantages:
- Never warps or rusts.
- Easy for new users to get a good first layer.
- Flexible, removable, and sticks well to magnets.
- Suitable for various filaments, especially PLA.
- Free to clean - just flex the plate a bit after cooling to remove prints.
- Fast heater performance, less waiting time after printing.
- A lifetime 3D printer bed.
Features:
- Smooth PEI, 0.2MM thick with 3M468 tape.
- Made of 100% real Ultem1000 (PEI) in amber color with a matte surface, from Europe.
- The spring steel sheet is flat, flexible, and adheres well to the bed magnet.
- PEI has pre - applied 3m tape, bubble - free.
Recommended print temps:
- PLA – 60C
- HTPLA – 60C
- PETG – 70 - 80C
- PCTG – 70 - 80C
- ABS – 100C
Using this spring steel build plate is easy. First, clean the bed with isopropyl alcohol before starting a print. Then set the recommended temperature according to the filament you're using, like 60C for PLA. When your print is done, wait until the plate is close to room temperature (under 30C) before removing the print. Just remove the spring steel plate, flex it a bit, and the print will pop off easily.
When printing PETG, PCTG, or TPU, apply hairspray or PVA gluestick before starting to prevent the filament from bonding too strongly to the PEI surface and damaging it.
To keep your plate in good condition, always clean it with isopropyl alcohol after removing prints. Store it in a dry place to avoid rust. With proper use and care, this plate will last you a long time.
