Are you in Australia and looking to buy a Slice Engineering Torque Wrench? Visit our Phaser FPV store on the Central Coast - Gosford NSW or shop online today! This torque wrench is compatible with all Slice nozzles. You can also tighten E3D and Bondtech nozzles using an adapter and socket. It's specifically designed for nozzle changes. With a 1.5 Nm torque, it creates a perfect seal to stop plastic leaks. When paired with The Mosquito Hotend™, it's the ideal tool for one - handed nozzle changes. It fits Vanadium Nozzles™ without any hassle, leaving a bit of space for stubborn plastic. And it can fit other nozzle styles with off - the - shelf adapters. Say goodbye to annoying nozzle changes and seal your nozzles perfectly with the Nozzle Torque Wrench™. Its rotary slip mechanism is set to 1.5 Nm, using a standard 1/4” drive. It fits Slice Engineering™ Vanadium Nozzles™ without an adapter, thanks to their 6 mm hex design. Use it with a hex - to - square drive adapter and a suitable socket to fit other nozzles.
Using the Slice Engineering Nozzle Torque Wrench is easy. First, if you're using it with Slice Engineering™ Vanadium Nozzles™, you can directly attach the wrench as they are designed to fit without an adapter. For other nozzles, you'll need a hex - to - square drive adapter and an appropriately sized socket. Once attached, turn the wrench. The rotary slip mechanism is set to 1.5 Nm, so when you reach this torque, it will stop, ensuring a proper seal and preventing plastic leaks. When changing nozzles, you can use it one - handedly if you pair it with The Mosquito Hotend™. As for maintenance, keep it clean after each use. Wipe off any plastic residue or debris. Store it in a dry place to prevent rusting. And don't try to adjust the torque setting on your own as it's pre - set for optimal performance.
