Slice Engineering Prusa Mini Upgrade Kit

Are you in Australia and eager to enhance your Prusa Mini 3D printer? This amazing upgrade kit is here to transform your printing experience! It replaces the E3D V6 Hotend with a high - performance Copperhead. The kit comes with a Copperhead Hot Block, a specialized Copperhead Heat Break for the Prusa Mini, a 0.4 mm BridgeMaster® Nozzle, a Copperhead Silicone Boot, Boron Nitride Paste, a Dowel pin to fill extra space in the hot block's thermistor slot, and a pre - cut PTFE Tube. Explore more Prusa Mini, Copperhead, and Slice Engineering products now!

Using this upgrade kit is easy. First, carefully remove the existing E3D V6 Hotend from your Prusa Mini. Then, install the Copperhead components one by one. Start with the Copperhead Hot Block, followed by the Heat Break. Attach the BridgeMaster® Nozzle and don't forget to add the Boron Nitride Paste for better heat transfer. Slip on the Silicone Boot and insert the Dowel pin in the thermistor slot. Finally, connect the pre - cut PTFE Tube. When using your upgraded printer, make sure to keep the printing area clean. Avoid touching the hot parts during operation. For maintenance, regularly check the nozzle for clogs. If there are any signs of wear on the components, replace them promptly. This will keep your Prusa Mini running smoothly with the upgraded kit.