Are you in Australia and looking to buy a magnetic PEI-coated spring steel build plate for your Ender 3 or Ender 5? Look no further! This double-sided bed from Energetic is a game-changer. The textured side is black in the PEI PRO HF Version and features the PHASER FPV logo in red at the bottom. Upgrade your 3D printing experience with this PEI-coated build sheet. No more worrying about glue sticks or prints not sticking. Just clean the bed with isopropyl alcohol, start printing, and when done, flex the build sheet to easily remove the print. Advantages include no warping or rusting, easy first-layer printing for newbies, flexibility, strong magnet adhesion, compatibility with various filaments (especially PLA), easy cleaning, fast heating, and it's a lifetime 3D printer bed. Features: 0.2MM smooth PEI with 3M468 tape, a flat spring steel sheet, a 1.5MM strong magnetic base with 300LSE tape, 600GS magnetism, and high-temperature resistance up to 130C. The material is 100% real Ultem1000 (PEI) in amber color with a matte surface, made in Europe. PEI comes pre-applied with 3M tape, bubble-free. Recommended print temps: PLA – 60C, HTPLA – 60C, PETG – 70 - 80C, PCTG – 70 - 80C, ABS – 100C.
Using this spring steel sheet is a breeze. First, clean the bed with isopropyl alcohol before starting your print. Set the print temperature according to the filament you're using: 60C for PLA and HTPLA, 70 - 80C for PETG and PCTG, and 100C for ABS. When printing PETG, PCTG, or TPU, apply hairspray or PVA gluestick to avoid bonding the filament to the PEI surface and damaging it. After the print is done, wait until the plate is close to room temperature (under 30C) before removing the print. To remove the print, simply take out the spring steel plate, flex it a bit, and the print will pop off easily. For maintenance, keep the sheet clean by wiping it with isopropyl alcohol. Store it in a dry place to prevent rusting. With proper use and care, this sheet will serve you well for a long time.
