Gigabyte M30 1TB SSD, M.2 2280, PCI-E 3.0 x4, NVMe 1.3, Sequential Read ~3500 MB/s, Sequential Write ~3000 MB/s [PC]

The Gigabyte M30 1TB SSD is a high-performance storage solution. It features an M.2 2280 form factor and uses a PCI-Express 3.0 x4 interface with NVMe 1.3 protocol. With sequential read speeds of up to 3500 MB/s and sequential write speeds of up to 3000 MB/s, it ensures fast data transfer. It supports advanced LDPC error correction, TRIM, and S.M.A.R.T. The external 2Gb DDR3L cache enhances performance. It has an efficient thermal solution using a 2oz copper PCB. The SSD comes with a limited 5-year or 650TBW warranty. It uses 3D TLC NAND Flash, has random read IOPS up to 308K and random write IOPS up to 332K. Its dimensions are 22 x 2.3 x 80 mm, with a mean time between failure of 2 million hours. Power consumption is low, and it can operate in temperatures from 0°C to 70°C and be stored from -40°C to 85°C.

Using the Gigabyte M30 SSD is easy. First, make sure your computer has an M.2 slot that supports PCI-Express 3.0 x4 and NVMe 1.3. Install the SSD in the slot and secure it properly. After that, your computer should recognize it automatically. When using it, keep in mind that the SSD has a limited write endurance, so try not to perform excessive write operations. To maintain its performance, keep your computer's operating system and drivers up - to - date. Also, avoid exposing the SSD to extreme temperatures. If you need to store it for a long time, make sure the storage environment is within the recommended temperature range of -40°C to 85°C.