MMW Micro Motor Warehouse SpeederBike frame

Designed by ZIPPIN, this Micro SpeederBike frame is a real gem. It's crafted to fit an AlienWii Narrow, 8.5mm motors, and a mini figure. You're in for a fast, smooth yet challenging ride. The SpeederBike not only looks like a bike but also behaves like one. When you speed up and keep the throttle open, it offers a locked - in, solid flight. Slow down, and it gets a bit wobbly. This frame has undergone numerous design changes, especially in the arm area. We've finally settled on crossed arms with a cross brace and straight mounts, symmetric at the front and rear. Its low center of gravity and narrow stance give you a unique flying experience. Specifications include 8.5mm motor mounts, outer dimensions of 130x52mm, a motor distance of 120x40mm, laser - sintered nylon material, and a weight of 6g. The maximum prop size is 66mm. We suggest using Parrot 66mm propellers, CL - 0820 - 15 motors (4 in the same direction), a mylipo 480mAh battery, and an AlienFC flight controller.

Using the SpeederBike frame is easy. First, install the 8.5mm motors into the mounts. Make sure to use 4 CL - 0820 - 15 motors all facing the same direction. Then, attach the Parrot 66mm propellers. Connect the mylipo 480mAh battery and the AlienFC flight controller. When you start flying, be ready for a fast ride. At high speeds, it's very stable, but when you slow down, it might get a bit unstable, so be careful. For maintenance, keep it clean from dust and debris. If you notice any damage to the laser - sintered nylon frame, replace it as soon as possible to ensure safe flight.