Aikon AK32 55A 2-6s 4 in 1 ESC BLHELI_32 - V3

Are you in Australia and looking to buy an Aikon AK32 55A 2 - 6S ESC? The Aikon AK32 4 - in - 1 55A 6S is a next - gen ESC. It combines advanced hardware and firmware technologies. This is the updated V3 version, without a 5V BEC like V1 and V2. Key features include a new BLHeli_32 code base, a programmable PWM frequency up to 48KHz, auto - timing for better efficiency and reliability, voltage/current sensing, adjustable 'Brake on Stop' force, improved direction change in bidirectional mode, ESC telemetry (voltage and RPMs only), and configuration from FC using DShot commands. Specifications: Input Voltage is 3 - 6S, Constant Current is 55A, Burst Current (10s) is 70A, MCU is AT32F421, Firmware is BLHeli32, it has telemetry and a current sensor with a scale of 210. Mounting Dimensions are 30.5 x 30.5mm and weight (w/o wire) is 18.5g. It comes with 1X Aikon AK32 4 - in - 1 55A 6S BLHELI32 ESC v3, a 35v 470uf capacitor, 5X Silicone grommets, 1X Power/Ground wire, and 1X ESC cable. Also, you can browse all 30x30 ESCs, 30x30 FPV Stacks, FPV ESCs, and AIKON products.

Using your Aikon AK32 55A 2 - 6S 4 - in - 1 ESC is quite straightforward. First, make sure to connect it properly to your flight controller using the provided ESC cable and power/ground wire. You can configure it from the FC using DShot commands. When flying, take advantage of its features like auto - timing for better efficiency. Remember, this is the V3 version without a 5V BEC, so you'll need to manage your power supply accordingly. As for maintenance, keep it clean from dust and debris. Check the connections regularly to ensure they are tight. If you notice any issues with the current sensing or telemetry, double - check the settings and connections. Store it in a dry and cool place when not in use to prolong its lifespan.