Are you in Australia and seeking to purchase an Aikon SEFM 30A BLHeli_S ESC (2 - 6s)? This AIKON SEFM 30A 2 - 6S Blheli_S DSHOT600 Brushless ESC is perfect for RC drone FPV racing. Specifications include a brand name of AIKON, an item name of SEFM 30A Brushless ESC, a 2 - 6S battery, a constant current of 30A, a burst current of 40A, Blheli_S CH50 firmware, an 8bb21 MCU, a bootloader, a 150mm signal wire length, a 100mm battery wire length, a weight of 10g with wire, and a size of 16*28mm. Key features are a new MCU with three - channel PMW output for motor control running at 48mhz, new BLHELI_S firmware for better response and smoother start - up, 1000 steps of throttle input resolution, and auto - detection of the input signal protocol. It also has high - quality MOSFETs with low internal resistance, three fast dedicated MOSFET drivers, and extra capacitance to protect your equipment. The package includes 1 x SEFM 30A Brushless ESC. You can also browse the 2 - 4S AK32 Single ESC, all Aikon ESC's, and all AIKON products.
Using the Aikon SEFM 30A BLHeli_S ESC is straightforward. First, connect it to your RC drone following the wiring instructions. Make sure to match the battery voltage within the 2 - 6S range. When powering on, the ESC will auto - detect the input signal protocol. For the best performance, adjust the throttle according to the 1000 steps of resolution. As for maintenance, keep it clean and dry. Check the wires regularly for any signs of damage. Avoid exposing it to extreme temperatures or humidity. If you notice any issues like overheating or inconsistent performance, disconnect it immediately and check for loose connections or damaged components. Also, ensure the MOSFETs and other parts are in good condition to keep your equipment running smoothly.
