Aikon F4 Mini 20x20 ICM20602 Flight Controller

Are you in Australia and seeking to buy an outstanding flight controller? You've hit the jackpot with the Aikon F4 Mini 20x20 Flight Controller! This new - generation controller is designed to work seamlessly with the Aikon AK32PIN 4 - in - 1, packing all the top features into one smooth flight experience. It has conveniently placed ESC signal ground and telemetry pads, and comes with a quick - connect cable for 4 - in - 1 ESCs that works right out of the box with the Aikon AK32PIN 4 - in - 1. With an on - board voltage regulator up to 6S, a 32khz capable system, a 168mhz F4 Processor, software serial for VTX control, onboard OSD and Blackbox, and LED outputs, it's a powerful choice. Specifications include a 2 - 6s battery, 20x20mm mounting holes, Betaflight AIKONF4 Target firmware, STM32F405 MCU, ICM - 20602 IMU, 16MB SPI Blackbox, and it weighs only 7g. It also has well - defined hardware UARTS for different functions. The package includes 1 Aikon F4 Mini 2020 FC, 4 red grommets, 2 silicone 8 - pin cables (one with bare leads and one with connectors for 4 - in - 1), and a paper manual.

Using your Aikon F4 Mini 20x20 Flight Controller is a breeze. First, connect the cables according to the hardware UARTS. For example, use UART1 for SerialRX and UART3 for S.PORT. Make sure the battery you use is within the 2 - 6s range as specified. When installing, use the 4 red grommets for the 20x20mm mounting holes to secure it properly. Before each flight, check the connections of the cables and make sure the on - board systems like the OSD and Blackbox are functioning. As for maintenance, keep it in a dry place and avoid exposing it to extreme temperatures. If you encounter any issues, refer to the paper manual that comes with the package. With proper use and care, your flight controller will serve you well for a long time.