BetaFPV 2S Battery Charger and Voltage Tester

Are you an Australian enthusiast searching for a top - notch 2S battery charger and voltage tester? BETAFPV has got you covered! With two versions featuring BT3.0 and XH2.54 ports, this charger can handle both LiHV 8.7V and LiPo 8.4V batteries. It's not just a charger; it comes with a digital display and 2S battery voltage monitoring. Plus, it supports the PD3.0 fast - charging protocol, giving you a faster and safer charging experience. Compact and portable, it's user - friendly and perfect for 2S quadcopter fans. Charge your batteries anytime, anywhere! Key features include a digital display, support for PD3.0, battery voltage monitoring, dual port options, a Type - C interface, and it fully meets the charging needs of 2S batteries. Specifications are as follows: battery types are BT3.0 - LiHV (8.7V) and XH2.54 - LiPo (8.4V), product colors are white (BT3.0) and black (XH2.54), input interface is Type - C USB, input voltage range is 5 - 12V, input power maxes at 15W, max input current is 2.5A, charging protocol is PD3.0, weight per charger is 17.0±1.0g, dimensions are 61*25*17mm, and it has an LED digital display for battery capacity. LED indicators show different charging statuses. Note that when the charger fails or the red light flashes, check the battery. Usage notes: mind the polarity, it only supports 2S batteries, and can charge one battery at a time. The XH2.54 version is for 2S LiPo batteries (8.4V), and charging LiHV batteries may lead to undercharging. The BT3.0 version is for 2S LiHV batteries (8.7V), and charging LiPo batteries may cause overcharging. The BETAFPV BT3.0 series accessories work great with this charger. What's included: 1 charger (XH2.54/BT3.0), 1 bilingual manual, 1 anti - static bag, and 1 service card.

Using this BetaFPV 2S Battery Charger and Voltage Tester is a breeze. First, make sure you pick the right charger version according to your battery type - BT3.0 for 2S LiHV 8.7V batteries and XH2.54 for 2S LiPo 8.4V batteries. Connect the charger to a power source using the Type - C USB input. The input voltage should be between 5 - 12V. When connecting the battery, pay close attention to the polarity markings on the device. Don't connect it in reverse, or it might damage the charger or the battery. This charger can only handle one 2S battery at a time, so don't try to charge multiple batteries simultaneously. While charging, keep an eye on the LED digital display and the red LED. If the display shows a voltage higher than the normal level for your battery type (8.4V for LiPo and 8.7V for LiHV), quickly disconnect the power and check the battery or the charger. If the charger fails to charge or the red light flashes, check if the battery is okay. You might need to replace the battery and try charging again. For normal use, store the charger in a dry and cool place. Avoid exposing it to extreme temperatures or moisture. If the charger gets dirty, you can use a soft, dry cloth to clean it. And that's it! With these simple steps, you'll have a smooth and safe charging experience with your BetaFPV charger.